Not Sure What You’re Looking For?

2017 Land Pride RCF3010 3-Point Mount

$6,670.00


New/Used
New
Availability
In Stock
Location
Ag. Equipment, Inc.
Title
Clean
Condition
Excellent
Year
2017
Manufacturer
Land Pride
Model
RCF3010 3-Point Mount

Overview

Dealer Insights

5 Year Limited Gearbox Warranty
0% Down, 0% APR, KCC, 4 Years

Description

The RCF3010 Dual-Spindle Rotary Cutter from Land Pride is the perfect medium-duty cutter for pastures and roadside applications. The RCF30 features a 2.5" cutting capacity and ¼" side skirts. Plus, every RCF3010 comes with the rugged dependability that Land Pride Rotary Cutters are known for.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • 540 or 1000 RPM: Fits wider variety of tractors.
  • High Gearbox HP rating: Gearboxes are built rugged. See Specifications for actual Gearbox HP ratings.
  • 5 Yr. limited gearbox warranty: Shows our confidence in the gearbox integrity.
  • 3 Gearboxes: Allows equal torque to be spread to left and right gearbox.
  • Splined rubber flex-couplers between the center and outboard gearboxes: Protects the driveline and gearboxes from hard objects in the blade path.
  • Pull-type unit Constant velocity drivelineU-Joint option (RCF3010 only): Reduces chatter and extends life of U-joint during turns.
  • Slip-clutch protection on main driveline: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
  • 8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-Point & Semi-mount Hitches or Pull-type Hitch: Fits a wide range of tractors. Semi-mount and Pull-type fit older tractors without a top link and smaller tractors without enough lift capacity.
  • 10 Gauge deck, fully welded: Fully welded deck adds rigidity.
  • 1/4" Thick sidewalls: Protects sidewalls from thrown objects.
  • Round back design: Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
  • Pull-type w/dual leveling rods: Dual leveling rods eliminate deck twisting when going over uneven terrain.
  • Chain or rubber guard option: Reduces flying debris.
  • Full length skids with replaceable shoes: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
  • Splined blade hub: Splined blade hub offers tight non-slipping attachment to output shaft.
  • 3/16" Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
  • 1" x 4" Blade bar: Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
  • 1/2" x 4" Heat-treated blades: Heat-treated blades last longer than non-heat-treated blades.
  • 2 1/2" Diameter cutting capacity: Aids in cutting brush.
  • High blade tip speed: Means cleaner cutting. See Specifications for actual blade tip speeds.
  • Laminated tires: Laminated tires can handle almost any condition and don’t go flat.
  • Quick-Hitch adaptable: 3-point and semi-mount are Quick-hitch adaptable.
  • Paint Options: Choice of red, orange, green, or tan to match popular tractor lines.
Specifications
  • Machine Weight With Front & Rear Rubber Guards.: 2,004 lbs.
  • Hitch: Category 2 & 3 Quick Hitch Adaptable
  • Cutting Width: 10 ft. -0 in.
  • Overall Width: 10 ft. - 6 1/2 in.
  • Overall Length: 10 ft. - 2 in.
  • Deck Height: 11 1/2 in.
  • Cutting Height: 2 in. - 12 in.
  • Cutting Capacity: 2 1/2 in.
  • Tractor H.P. Rating (PTO): 60 - 110
  • Gearbox Rating H.P.: T-Box - 160 HP, Outboard 110 HP
  • Gearbox: 540 rpm PTO Driven Gearbox Cast Iron Housing, Beveled Gears
  • Gearbox Input/ Output Shaft Size: Input Shaft = 1 3/4 in. - 20 Spline; Output Shaft = 2 in. Dia.
  • Gearbox Lubrication: 80-90W EP Gear Lube
  • Gearbox Oil Capacity End Boxes: Comer = 6 Pints
  • Gearbox Oil Capacity T-Box: Comer = 4.5 Pints
  • Deck Material Thickness: 10 gauge
  • Deck Side Skirt Thickness: 1/4 in.
  • Skids: Replaceable
  • Stump Jumper: 2 ea. - 3/16 in. Round Pan
  • Blades (4): 1/2 in. x 4 in. Heat Treated Free-Swinging Suction Blades
  • Blade Bolts: Keyed with Harden Flat Washer and Lock Nut
  • Blade Tip Speed: 540 RPM 17,100 fpm
  • Driveline: ASAE Cat 4
  • Driveline Protection: 540 rpm - 4 plate Slip Clutch, Rubber Flex Coupler to Wing Boxes
  • Tailwheel Options - Without Rear Axle: 2 Tires: 4 in. x 8 in. x 15 1/4 in. Caster Laminated
  • Tailwheel Options - With Rear Axle: 2 Tires: 4 in. x 8 in. x 15 1/4 in. Caster Laminated or 6 in. x 9 in. x 21 in. Caster Laminated
  • Wheel Bearings: Tapered Roller Bearing in Cast Iron Hub
  • Shock Absorption: Spring Shock Absorber on Axle of Semi-Mount & Pull Type
  • Front Guard: Optional: Rubber deflector, Single Chain guard, or Double Chain Guard
  • Rear Guard: Optional: Rubber deflector, Single Chain guard, or Double Chain Guard

Specs

General

Working Width
10 ft.
Width
10 ft. 6 1/2 in.
Length
10 ft. 2 in.
Weight
2,004 lb.
Recommended HP
60-110 PTO hp