2017 Land Pride RC4015 Series 2

$14,620.00


New/Used
New
Availability
In Stock
Location
Ag. Equipment, Inc.
Title
Clean
Condition
Excellent
Year
2017
Manufacturer
Land Pride
Model
RC4015 Series 2

Overview

Dealer Insights

7 Year Limited Gearbox Warranty
0% Down, 0% APR, KCC, 4 Years

Description

Combine the rugged, heavy-duty gearboxes from our RC5615 Cutter and the proven dependable deck from our RC3615 Cutter and you get the new Land Pride RC4015. The RC4015 features a 15' cutting width, 3.5" cutting capacity and heavy-duty gearboxes. The RC4015 is a solid medium-duty cutter in a long line of quality folding cutters from Land Pride.

Features
  • Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254.
  • Factory assembled: Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
  • 7 Year limited gearbox warranty: Shows confidence in gearbox integrity. (6th & 7th year parts only)
  • Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 Piece shield on wing gearboxes: Driveline grease zerks are easier to access.
  • LP Performance self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Low hitch weight on tractor tongue: Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor PTO shaft.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Drivelines with slip-clutches: Cat. 5 intermediate Cat. 4 Wings: Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
  • Grease zerks on end caps of driveline cross journals: Intermediate and wing driveline cross journals are easier to grease.
  • High blade tip speed: Allows clean cutting of material.
  • 6" Blade overlap: Eliminates skipping during turns.
  • Left wing rotates clockwise: Better discharge of material. Picks up tractor tracks.
  • 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
  • Smooth top design: Reduces accumulation of debris and is easier and faster to clean.
  • Deck sheet tops are 100% welded: Makes center decks and wing decks stronger.
  • 1/4" Sidewall thickness: Increased thickness reduces damage from objects being thrown into deck sidewalls.
  • Beveled skid shoes on wings: Reduces gouging the ground when turning.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport locks: Wing transport locks will hold wings in the folded position in the event of hydraulic loss.
  • Enclosed dual leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring cushioned center-axle: Protects unit from bumps and ground shock.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing entire axle assembly.
  • Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting and can’t go flat.
  • LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Roadway light kit option: Allows operator to transport on public roads safer.
  • Deck ring option: Keeps blades from damaging the deck.
Specifications
  • Horsepower Range: 50 - 200
  • Gearbox Horsepower: 540 RPM; 250 HP Divider, 210 HP Center & Wings
  • Gearbox Lubrication: Gear Lube 80-90W EP
  • Gearbox Capacity: Splitter: 3.5 pints; Center deck & Wings: 6 pints
  • Cutting Capacity: 3.5 in.
  • Machine Weight: Tongue weight = 1,240 lbs; Total weight = 3,730 lbs.
  • Blade Tip Speed At 540 RPM: Center Blades = 16,300 FPM & Wing Blades = 16,300 FPM
  • Hitch Types: Standard Clevis, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
  • Hitch Jack: Standard (7,000 lbs.)
  • Cutting Width: 15 ft.-0 in.
  • Overall Width: 15 ft.-9 in.
  • Minimum Transport Width: 7 ft.-11 3/4 in.
  • Overall Length: 15 ft.-6 in. (With center deck raised fully up)
  • Deck Height: 12 in.
  • Cutting Height: 2 in. - 14 in.
  • Lift Hydraulics: 3 in. x 8 in. hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing Hydraulics: 2 1/2 in. x 12 in. hydraulic cylinders, hoses & fittings
  • Wing Transport Protection: Wing Transport Locks
  • Deck Material Thickness: 10 gauge
  • Side Skirt Thickness: 1/4 in. Steel
  • Skid Shoes: Wing Deck: AR400 1 Replaceable skid shoe per wing; Center Deck: AR400 2 Replaceable skid shoes
  • Blades - 6 (2 per Carrier): 1/2 in. x 4 in. Heat Treated Free Swinging Alloy Steel with Uplift
  • Blade Overlap: 6 in.
  • Blade Bolt: Keyed with hardened flat washer & lock nut
  • Stump Jumper / Blade Holder: 3/16 in. Thick round dish shaped pan, reinforced with 1 in. x 4 in. blade bar
  • Front & Rear Guards: Optional rubber, single row chain or dual row chain
  • Input Driveline 540 & 1000 PTO: Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate Driveline: Standard - Category 4 with Slip-Clutch
  • Wing Drivelines: Standard - Category 4 with Slip-Clutch
  • Wheel Options: 6" x 21" Laminated tires, 25.5" new foam filled tires, 29" x 16 ply used aircraft tires without foam filling.
  • Number of Wheels: 4 Wheel option: 2 on transport axle and 1 on each wing axle; 6 Wheel option: 4 on transport axle and 1 on each wing axle; 8 Wheel option: 4 on transport axle and 2 on each wing axle
  • Transport Axle: Spring-cushioned on center transport axle
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. shafts.
  • Deck Rings: Optional
  • Color Options: Standard color: Beige; Optional colors: Red, Green, Orange, or Yellow.

Specs

General

Working Width
15 ft.
Width
15 ft. 9 in.
Length
15 ft. 6 in.
Weight
3,730 lb.
Recommended HP
50-200 hp

Related Products